Hydrogenation Unit

      No Comments on Hydrogenation Unit

Proses pengolahan minyak atau lemak dengan jalan menambahkan hidrogen pada ikatan rangkap dari asam lemak, sehingga akan mengurangi ketidakjenuhan minyak atau lemak, dan membuat lemak bersifat plastis.
Alat ini digunakan untuk mengatur tingkat kejenuhan 25 liter minyak nabati.
Contoh input : minyak sawit mentah
Contoh output : minyak goreng tidak beku di suhu ruang.

Description

Hydrogenation Unit
Miniature Scale R&D Technology

Features :
• Stainless steel pressure vessel
• Vacuum liquid ring pump
• Extraction pump
• Pressure leaf filters
• Air driven agitators
• Integral steam heating coil and cooling coil
• Temperatures to 180°C
• Safe zoned controls
• Accurate control of hydrogen addition
> Reusable filter mesh

Technical Specification :
1. Hydrogenation Vessel :
– Volum total : 46.0 litres
– Volum tangki : 25.0 litres
– Area koil pendingin/pemanas : 0.08m2
– Suhu kerja maksimum : 180°C
– Tekanan kerja normal : 0.7bar and 65 mbar.
– Tekanan kerja maksimum : 2bar
– Penggerak Pengaduk : Pneumatic motor/gearbox
– Kecepatan maksimum : 2500 rpm
Dimensi seluruhnya PxLxT (mm) : 1850 x 1290 x 950

2. Catalyst Tank :
Volume: 4.0 litres
Stirrer: Pneumatic drive, to 850 rpm

3. Filter Pump :
Type: Centrifugal
Impeller: Closed
Capacity: 100 l/m @ 2.75 bar

4. Liquid Ring Vacuum Pump :
Capacity: 66.0m3/hr
Sealant: Water
Sealant flow rate: 6.0 l/m
Normal operating pressure: 65 mbar

5. Pressure Leaf Filter
Material: Stainless steel
Filter volume: 3.8 litres
Filter cake capacity:1.0 litre
Filtering area: 0.09m2
Filter screen: 110 mesh (0.3mm wire)
Maximum pressure: 3.0 bar

Requirements :
Electricity
415V/3ph/50Hz, (6.5kW)
208V/3ph/60Hz, (8.5kW)
380V/3ph/50Hz, (6.5kW)
220V/3ph/60Hz, (8.5kW)

Cooling Water
20.0 l/m @ 3.0 bar min – 5.0 bar max pressure
Steam Supply
100.0 kg/hr @ 10.0 bar min. pressure
Compressed Air
25.0 l/s @ 6.0 bar min – 10.0 bar max pressure

Leave a Reply

Your email address will not be published. Required fields are marked *